add wishlist add wishlist show wishlist add compare add compare show compare preloader

30 Day Money Back Guarantee

Fast Shipping Worldwide

How to Use Diamond Microdermabrasion Machine - Lazzybeauty

How to Use Diamond Microdermabrasion Machine


Maybe you see that there are many types of Diamond Microdermabrasion on the market. Still, it must contain several parts, one is Vacuum, the other is Vacuum Adjustment knob, and the third is Diamond dermabrasion heads and wands. All you need to do is connect them. Moreover, they are straightforward.

Diamond Dermabrasion Introduction

  • It is a creative improvement of the micro-crystal dermabrasion. The diamond dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then vacuuming out the particles along with any dirt and dead skin back up.
  • This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin.
  • Moderate usage of diamond dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health.
  • The results after microdermabrasion treatment is usually a healthy, glowing, beautiful skin.
  • Connect the spraying gun, exfoliation head, and exfoliation pen rightly. And adjust the device is working intensity to a proper degree according to your condition.
  • Effects: Diamond dermabrasion, spray replenishment, diluting wrinkles/fine lines, removing cutin/blemishes, fading pigmentation.



How to Use the Diamond Dermabrasion Function?

Diamond Dermabrasion

Diamond Microdermabrasion provides a Non-Surgical skin resurfacing procedure by using sterile diamond heads to peel and rub off the dead cells at the top skin layer followed by vacuuming/suction removing particles along with any dirt and dead skin.

This procedure removes skin debris, scars, blemishes, wrinkles, and uneven pigmentation of the skin.


 Hot to use diamond microdermabrasion function

Step 1: Unscrew the vacuum interface
Step 2: Put in a big cotton filter and screw the interface tightly
Step 3: Connect the oil filter
Step 4: Attach the PVC hose to the connector
Step 5: Connect the other end of the PVC hose at the end of the wand
Step 6: Put a small cotton filter on the head of the wand
Step 7: Choose a proper tip and screw it tightly
Step 8: Connection finished
Step 9: Connect the power
Step 10: Turn it on
Step 11: Adjust the intensity
Step 12: Start to use

Vacuum Function

Vacuum Therapy Cleans dirty pores through suctioning tubes and increases blood circulation in the skin.

Help give elasticity in the skin and can decrease discoloration from acne and scars.

There are three PVC hoses, they have the same function, you can choose anyone to connect with the glass tube as you like.

How to use vacuum

Step 1: Unscrew the vacuum interface
Step 2: Put in a big cotton filter and screw the interface tightly
Step 3: Choose any one of the hose. Take "A" as an example
Step 4: Connect the hose to the interface
Step 5: Choose one of the glass tubes
Step 6: Connect the glass tube and the hose
Step 7: Connection finished
Step 8: Turn it on
Step 9: Start to use


The Spray Function Refreshing mist used after a treatment. You should fill 1/2 to 3/4 of the bottle with toner and push the top of the bottle with your finger to create a mist spray. It helps closing pores and smoothes the skin. This is usually done after diamond microdermabrasion peeling and vacuum suction.

Also calming down the skin after peeling and suctioning. The skin is sensitive after peeling and vacuum treatment, so the spray procedure is necessary.

How to use spray

Step 1: Connect the black/red PVC hose to the connector
Step 2: Fill the bottle with toner
Step 3: Tight it carefully
Step 4: Connect the black/red hose to the bottle
Step 5: Connection finished
Step 6: Connect the power adapter to the socket
Step 7: Turn the machine on
Step 8: Start to use


Comments (0)

    Leave a comment

    Comments have to be approved before showing up