Máquina de congelación de grasa

A fat freezing machine, also known as cryolipolysis, is an FDA-approved non-invasive fat reduction therapy that helps sculpt and slim specific areas of the body by freezing fat cells. This method takes advantage of the fact that fat cells are more sensitive to cold than other types of cells. During treatment, the targeted area is cooled to around 4°C, which causes the fat cells to freeze and die without damaging the surrounding skin or tissues. Over time, the body naturally eliminates these dead fat cells through its metabolic process.

Since fat cells freeze at a higher temperature (around 4°C) than water (0°C), they are the first to be affected by the cold. Once they solidify and crystallize, the fat cells die and are eventually removed through metabolism. The cooling process is precisely controlled, targeting only the fat cells in the selected area.

One major advantage of fat freezing is that it doesn’t just shrink the fat cells, but actually reduces their number, lowering the chances of fat returning to that area. The procedure is painless, requires no recovery time, and delivers natural, long-lasting results.

Cryolipolysis, also known as "fat freezing," is a non-invasive treatment that uses a special device to deliver cooling waves to the targeted fat area. Without surgery, the treatment typically lasts around 30 minutes, during which the fat cells are cooled, killed, and eventually reduced in that specific area.

Once the fat cells are "frozen to death," the body naturally eliminates them through its metabolism.

From a more technical perspective, cryolipolysis is based on the fact that triglycerides in fat cells solidify at around 5°C. This selective and non-invasive technology uses a cooling device to reduce localized fat by capturing and selectively cooling subcutaneous tissue using vacuum technology. This damages the fat cells without harming the surrounding tissue.

Fat cells are rich in fatty acids, making them more sensitive to cold than surrounding cells like blood vessels, nerves, melanocytes, and fibroblasts. This sensitivity difference means that at a specific low temperature (0-10°C), fat cells lose their viability while other tissues remain unaffected. During the procedure, the treatment area is cooled for about an hour, damaging the fat cells. After treatment, the cold induces fat breakdown, causing the triglycerides in the fat cells to age prematurely, leading to cell death. Two to three months later, the dead fat cells are naturally expelled from the body, resulting in a slimming effect.

This cryolipolysis technique is particularly effective for areas with thicker layers of fat, such as the waist, abdomen, and back. Under the machine's cooling effect, fat cells gradually die, dissolve, and are metabolized over a period of 2-6 weeks, helping to sculpt and slim the body.

Fat freezing machine is known for its precision, effectiveness, comfort, and long-lasting results, with a single treatment typically reducing up to 25% of fat in the treated area.

If you’re thinking about getting a fat freezing machine to help with body sculpting, it can be tricky to know where to start, especially with so many brands and types like CoolSculpting and others out there. Here’s a simple guide to help you choose the right machine for your needs.

Understand the Technology Not all fat freezing machines work the same way. Different machines use advanced cooling technology differently—some cool the fat quickly, while others focus on keeping a constant temperature for longer periods. There are mainly two types of cooling systems: air cooling and water cooling. Water cooling, like what’s used in car engines, is generally more stable. We recommend machines with water cooling for better performance and reliability.

Choose the Right Machine for Your Needs Fat is stored differently in various parts of the body, so different areas may require different applicators. For instance, the applicator used for your midsection will be different from the one needed for your chin. Look for machines that come with a variety of applicators, so you can target the specific areas where you want to reduce fat. If you’re focused on reducing belly fat, for example, you’ll want a machine with a larger applicator.

Consider Comfort Fat freezing might not sound like a spa treatment, but it doesn’t have to be uncomfortable. Some machines come with features like massage or adjustable temperature settings to make the process more comfortable. If you’re sensitive to cold, look for machines that offer these added comfort features.

Expertise is Key While having the right machine is important, having a trained professional to operate it can make all the difference. Even the most advanced machine works best when used by someone who knows how to target specific areas for the best results. If you’re buying a machine for home use, it’s crucial to follow instructions carefully. Fortunately, when you buy from us, all our machines come with detailed instructions and operation videos, so you’ll know exactly how to use them safely and effectively.

The Popular 360-Degree Fat Freezing Machines Fat freezing technology has come a long way, and the most popular option now is the 360-degree full-surround fat freezing machine. These machines freeze fat from all angles for better results. Let’s take a closer look at the different types available.

Existen diferentes máquinas de congelación de grasa diseñadas para la criolipólisis, un procedimiento no invasivo que ataca y reduce los depósitos de grasa persistentes. Marcas populares como CoolSculpting, Clatuu, SculpSure y Zeltiq lideran el mercado con tecnología avanzada y resultados efectivos. Cada uno de estos dispositivos de congelación de grasa ofrece características y beneficios únicos, que se adaptan a diversas necesidades y preferencias. Con una variedad de opciones disponibles, las personas pueden elegir la máquina que mejor se adapte a sus objetivos específicos de contorno corporal.

A continuación se muestran los 4 más populares, y nuestra recomendación es el segundo tipo "máquina de congelación de grasa 360", que ofrece una fuente de alimentación independiente y un sistema de operación de control separado, lo que hace que la operación sea más estable, segura y energéticamente eficiente. El mango de congelación está hecho de material de silicona suave. Tiene siete tamaños intercambiables, lo que proporciona una experiencia de operación más cómoda. El sistema de instrumentos adopta cuatro canales y controles, lo que permite una operación más conveniente, segura y efectiva.

When using cryolipolysis (fat freezing) for body sculpting, it’s important to manage the temperature of the machine carefully. Fat cells are more sensitive to cold than skin cells. At 4°C (39°F), fat cells die, but the skin remains mostly unharmed. However, if the temperature drops below 4°C, there is a risk of skin damage. To prevent this, the device should never come into direct contact with the skin; an antifreeze membrane must be applied to protect it.

Certain people should not undergo cryolipolysis. If you have any of the following conditions, avoid the treatment:

• Cryoglobulinemia
• Cold agglutinin disease
• Paroxysmal cold hemoglobinuria

Always let your doctor know about any medical conditions you have, recent surgeries, or allergies before starting the treatment.

Women should avoid cryolipolysis during special times such as menstruation, pregnancy, or breastfeeding. In particular, abdominal treatments during these periods could worsen uterine cold and cause discomfort.

People with liver issues should not use cryolipolysis. Since the treatment relies on your body’s metabolism to remove dead fat cells, it can place extra strain on the liver. If you have liver problems, it's better to explore other fat reduction options.

After cryolipolysis, it’s essential to control your diet and exercise regularly. The treatment reduces the number of fat cells, but it doesn’t boost your metabolism or burn extra calories. If you don’t watch your eating habits and stay active, the fat could return.

En la edad adulta, la cantidad de células grasas es fija y el tamaño de las células grasas varía según si la persona es gorda o delgada. Ya sea que haga ejercicio o esté a dieta para perder peso, el principio fundamental es que la ingesta de energía sea menor que el gasto de energía.

La grasa corporal es una de las reservas de energía y el líquido graso de las células grasas se consume. Estos métodos de pérdida de peso solo pueden reducir las células grasas tanto como sea posible, y las células en sí siguen existiendo, pero no pueden reducir la cantidad de células. Por lo tanto, la tasa de éxito de la pérdida de peso podría ser mayor y difícil y fácil de recuperar.

La obesidad en los seres humanos se debe a un número excesivo de células grasas o a una expansión excesiva de las mismas. Las células grasas se encuentran ampliamente distribuidas en los tejidos subcutáneos y viscerales. La cantidad de células grasas humanas se fija después de la pubertad y las células grasas que causan la obesidad no aumentan ni disminuyen una vez que se forman.

La máquina de congelación de grasa es uno de los mejores métodos para la reducción de grasa sin efecto rebote; puedes utilizarla para esculpir el cuerpo donde quieras. La ventaja más importante de la congelación de grasa es que puede moldear tu cuerpo.

Mentón, brazos, abdomen, flancos, cintura, espalda (donde se usa la ropa interior), senos accesorios, cara interna de los muslos, cara externa de los muslos, parte inferior de los glúteos, espalda, pecho masculino y grasa del pecho. Estas son las áreas que se tratan con más frecuencia.

As we reach adulthood, the number of fat cells in our bodies stabilizes. Weight changes occur primarily due to fluctuations in the size of these fat cells rather than changes in their quantity. Traditional weight loss methods, such as exercise and dieting, focus on consuming fewer calories than the body expends. When we lose weight, our bodies use stored energy from fat cells, causing them to shrink, but the cells remain present. This is why regaining weight is common; the fat cells can easily expand again.

For adults at a normal weight, the body typically has about 250-300 billion fat cells, located in subcutaneous and visceral tissues. After puberty, this number is fixed, meaning fat cells do not increase or decrease in number; they only swell or shrink. Obesity occurs either due to an excess of fat cells or the expansion of existing ones.

Cryolipolysis offers a different approach by targeting specific areas of the body for fat reduction. Instead of general weight loss, this method focuses on "freezing" fat cells in localized regions, effectively causing them to be reduced where treatment is applied. While the treatment may only decrease fat in the targeted area by about 25%, the real advantage of cryolipolysis lies in its ability to sculpt and shape the body.

A typical cryolipolysis treatment involves several key steps: skin cleansing before treatment, application of a cryotherapy mask, the treatment itself, and a post-treatment skin cleansing.

Cryolipolysis is particularly effective for individuals struggling with localized obesity. Ideal candidates are not those with generalized obesity but rather those looking to target concentrated areas of fat, such as the abdomen, flanks, waist, arms, and buttocks. Depending on the thickness of the fat and the desired outcome, patients typically require 1 to 3 treatment sessions, with a minimum waiting period of 30 days between sessions. Each course of cryolipolysis can eliminate approximately 35-45% of fat in the targeted area.

Initial Assessment: The process begins with a physical examination. A trained therapist will evaluate your condition in detail to identify areas of concentrated fat.

Marking the Treatment Area: Once the areas to be treated are determined, they are clearly marked for precision during the procedure.

Application of Cryotherapy Mask: To protect your skin from potential frostbite during treatment, a specialized cryotherapy mask is applied to the targeted area.

Beginning the Treatment: The treatment head is positioned over the marked area, where it will create a gentle suction to draw the fat into the device. This initiates the cryotherapy process.

Initial Sensation: During the first few minutes, you may experience a tingling sensation as the cooling begins. However, any discomfort typically subsides quickly, and most patients find the overall experience to be quite comfortable.

Treatment Duration: The cryotherapy session usually lasts around 35 minutes.

Post-Treatment Massage: After the treatment, a relaxing massage is performed on the treated area for about 3-5 minutes. This massage helps to break down the treated fat cells and enhance the fat reduction effects.

A single cryolipolysis treatment can eliminate 20-30% of fat cells in the targeted area. Over time, the body naturally metabolizes and excretes the apoptotic fat cells, leading to a healthier, more contoured body shape.

Patients typically require 1-3 sessions, with at least 30 days between each treatment. Depending on the area being treated, each session can last anywhere from 45 minutes to several hours.

In the initial ten minutes, you may feel a pulling sensation as the treatment probe attaches to your body. This includes a slight suction and cold sensation in the treated area. Although some discomfort may be felt initially, it usually diminishes as the procedure continues, and most patients report no pain once the area is cooled. After treatment, the targeted area may feel temporarily numb for about a week. The post-treatment massage further helps to break down the fat cells and maximize results.

La congelación de grasa, o criolipólisis (CoolSculpting), se considera generalmente un tratamiento de reducción de grasa no invasivo, seguro y eficaz. Sin embargo, como cualquier procedimiento médico, puede tener efectos secundarios. Estos son los efectos secundarios más comunes asociados con la congelación de grasa:

• Moretones: La succión y las temperaturas frías pueden provocar moretones en el área tratada, que generalmente desaparecen en unas pocas semanas.
• Hinchazón y enrojecimiento: El área tratada puede estar hinchada y roja inmediatamente después del procedimiento, lo que puede durar desde unos días hasta algunas semanas.
• Dolor y escozor: algunos pacientes refieren dolor, escozor o molestias en la zona tratada durante y después del procedimiento. Esta molestia suele desaparecer en unos días.
• Sensibilidad de la piel: las zonas tratadas pueden sentirse sensibles al tacto o presentar entumecimiento u hormigueo temporal, que puede durar algunas semanas.
• Firmeza: El área tratada puede sentirse firme o rígida debido al proceso de congelación, que generalmente se resuelve con el tiempo.
• Picazón: A medida que el cuerpo elimina las células grasas congeladas, algunos pacientes pueden experimentar picazón en el área tratada.

Recuerde lo siguiente:

1. Después del tratamiento, beba mucha agua para ayudar a su cuerpo a deshacerse de las células grasas muertas.
2. Comer saludablemente y hacer ejercicio regularmente es importante para evitar la formación de nuevas células grasas y mantener los resultados.

Maquinas comerciales de congelación de grasa

1. CoolSculpting de Allergan:

• Costo: Aproximadamente $75,000 a $150,000
• Detalles: CoolSculpting es una de las máquinas de congelación de grasa más conocidas y utilizadas. El mayor costo está asociado con la reputación de la marca, la eficacia y el soporte integral del fabricante.

2. CoolShaping 2:

• Costo: Alrededor de $60,000
• Detalles: Otra opción popular, CoolShaping, ofrece capacidades similares a CoolSculpting pero a un precio ligeramente más bajo.

Otras máquinas profesionales de congelación de grasa

1. Clatuu Alfa:

• Costo: Aproximadamente $60,000 a $80,000
• Detalles: Esta máquina ofrece aplicadores duales y es conocida por su eficiencia y confiabilidad.

2. Zeltiq CoolAdvantage:

• Costo: alrededor de $70,000
• Detalles: Parte de la familia CoolSculpting, esta máquina ofrece tiempos de tratamiento más rápidos y mayor comodidad.

Dispositivos portátiles y de uso doméstico

• Costo: Aproximadamente $500 a $1,500
• Detalles: Estos dispositivos son significativamente más económicos y menos efectivos que las máquinas profesionales. No están aprobados por la FDA y, por lo general, no se recomiendan debido a problemas de seguridad y eficacia.

Costos adicionales

• Aplicadores: Las máquinas profesionales a menudo requieren la compra de aplicadores adicionales, que pueden costar entre $1,000 y $5,000 cada uno, dependiendo del tamaño y el tipo.
• Mantenimiento y capacitación: puede haber costos adicionales por mantenimiento de la máquina, capacitación de técnicos y actualizaciones de software.