Машина для замораживания жира

A fat freezing machine, also known as cryolipolysis, is an FDA-approved non-invasive fat reduction therapy that helps sculpt and slim specific areas of the body by freezing fat cells. This method takes advantage of the fact that fat cells are more sensitive to cold than other types of cells. During treatment, the targeted area is cooled to around 4°C, which causes the fat cells to freeze and die without damaging the surrounding skin or tissues. Over time, the body naturally eliminates these dead fat cells through its metabolic process.

Since fat cells freeze at a higher temperature (around 4°C) than water (0°C), they are the first to be affected by the cold. Once they solidify and crystallize, the fat cells die and are eventually removed through metabolism. The cooling process is precisely controlled, targeting only the fat cells in the selected area.

One major advantage of fat freezing is that it doesn’t just shrink the fat cells, but actually reduces their number, lowering the chances of fat returning to that area. The procedure is painless, requires no recovery time, and delivers natural, long-lasting results.

Cryolipolysis, also known as "fat freezing," is a non-invasive treatment that uses a special device to deliver cooling waves to the targeted fat area. Without surgery, the treatment typically lasts around 30 minutes, during which the fat cells are cooled, killed, and eventually reduced in that specific area.

Once the fat cells are "frozen to death," the body naturally eliminates them through its metabolism.

From a more technical perspective, cryolipolysis is based on the fact that triglycerides in fat cells solidify at around 5°C. This selective and non-invasive technology uses a cooling device to reduce localized fat by capturing and selectively cooling subcutaneous tissue using vacuum technology. This damages the fat cells without harming the surrounding tissue.

Fat cells are rich in fatty acids, making them more sensitive to cold than surrounding cells like blood vessels, nerves, melanocytes, and fibroblasts. This sensitivity difference means that at a specific low temperature (0-10°C), fat cells lose their viability while other tissues remain unaffected. During the procedure, the treatment area is cooled for about an hour, damaging the fat cells. After treatment, the cold induces fat breakdown, causing the triglycerides in the fat cells to age prematurely, leading to cell death. Two to three months later, the dead fat cells are naturally expelled from the body, resulting in a slimming effect.

This cryolipolysis technique is particularly effective for areas with thicker layers of fat, such as the waist, abdomen, and back. Under the machine's cooling effect, fat cells gradually die, dissolve, and are metabolized over a period of 2-6 weeks, helping to sculpt and slim the body.

Fat freezing machine is known for its precision, effectiveness, comfort, and long-lasting results, with a single treatment typically reducing up to 25% of fat in the treated area.

If you’re thinking about getting a fat freezing machine to help with body sculpting, it can be tricky to know where to start, especially with so many brands and types like CoolSculpting and others out there. Here’s a simple guide to help you choose the right machine for your needs.

Understand the Technology Not all fat freezing machines work the same way. Different machines use advanced cooling technology differently—some cool the fat quickly, while others focus on keeping a constant temperature for longer periods. There are mainly two types of cooling systems: air cooling and water cooling. Water cooling, like what’s used in car engines, is generally more stable. We recommend machines with water cooling for better performance and reliability.

Choose the Right Machine for Your Needs Fat is stored differently in various parts of the body, so different areas may require different applicators. For instance, the applicator used for your midsection will be different from the one needed for your chin. Look for machines that come with a variety of applicators, so you can target the specific areas where you want to reduce fat. If you’re focused on reducing belly fat, for example, you’ll want a machine with a larger applicator.

Consider Comfort Fat freezing might not sound like a spa treatment, but it doesn’t have to be uncomfortable. Some machines come with features like massage or adjustable temperature settings to make the process more comfortable. If you’re sensitive to cold, look for machines that offer these added comfort features.

Expertise is Key While having the right machine is important, having a trained professional to operate it can make all the difference. Even the most advanced machine works best when used by someone who knows how to target specific areas for the best results. If you’re buying a machine for home use, it’s crucial to follow instructions carefully. Fortunately, when you buy from us, all our machines come with detailed instructions and operation videos, so you’ll know exactly how to use them safely and effectively.

The Popular 360-Degree Fat Freezing Machines Fat freezing technology has come a long way, and the most popular option now is the 360-degree full-surround fat freezing machine. These machines freeze fat from all angles for better results. Let’s take a closer look at the different types available.

Different fat freezing machines are engineered for cryolipolysis, a non-invasive procedure that targets and reduces stubborn fat deposits. Popular brands like CoolSculpting, Clatuu, SculpSure, and Zeltiq lead the market with advanced technology and effective results. Each of these fat-freezing devices offers unique features and benefits, catering to various needs and preferences. With a range of options available, individuals can choose the machine that best aligns with their specific body contouring goals.

Below are 4 most popular ones, and our recommendation is the second type "360 fat freezing machine, which offers an independent power supply and separate control operation system, making the operation more stable, safe, and energy-efficient. The freezing handle is made of soft silicone material. It has seven interchangeable sizes, providing a more comfortable operation experience. The instrument system adopts four channels and controls, allowing for more convenient, safe, and effective operation.

When using cryolipolysis (fat freezing) for body sculpting, it’s important to manage the temperature of the machine carefully. Fat cells are more sensitive to cold than skin cells. At 4°C (39°F), fat cells die, but the skin remains mostly unharmed. However, if the temperature drops below 4°C, there is a risk of skin damage. To prevent this, the device should never come into direct contact with the skin; an antifreeze membrane must be applied to protect it.

Certain people should not undergo cryolipolysis. If you have any of the following conditions, avoid the treatment:

• Cryoglobulinemia
• Cold agglutinin disease
• Paroxysmal cold hemoglobinuria

Always let your doctor know about any medical conditions you have, recent surgeries, or allergies before starting the treatment.

Women should avoid cryolipolysis during special times such as menstruation, pregnancy, or breastfeeding. In particular, abdominal treatments during these periods could worsen uterine cold and cause discomfort.

People with liver issues should not use cryolipolysis. Since the treatment relies on your body’s metabolism to remove dead fat cells, it can place extra strain on the liver. If you have liver problems, it's better to explore other fat reduction options.

After cryolipolysis, it’s essential to control your diet and exercise regularly. The treatment reduces the number of fat cells, but it doesn’t boost your metabolism or burn extra calories. If you don’t watch your eating habits and stay active, the fat could return.

In adulthood, the number of fat cells is fixed, and the size of fat cells changes for a person's fat and thin. Whether exercise or dieting to lose weight, the main principle is that energy intake is less than energy expenditure.

Body fat is one of the energy reserves, and the fat fluid in fat cells is consumed. These weight loss methods can only shrink the fat cells as much as possible, and the cells themselves still exist but cannot reduce the number of cells. Therefore, the success rate of weight loss could be higher and difficult and easy to rebound.

An excessive number of fat cells or excessive expansion causes obesity in humans. The fat cell is widely distributed in the subcutaneous and visceral tissues. The number of human fat cells is fixed after puberty, and the fat cells that cause obesity will not increase or decrease once they are formed.

The fat-freezing machine is one of the best methods for fat reduction without rebound; you can use it for body sculpting wherever you want. The most significant advantage of fat freezing is that it can shape your body.

Chin, arms, abdomen, flanks, waist, back (where underwear is worn), accessory breasts, inner thighs, outer thighs, lower buttocks, back, male chest, and chest fat. These are the most commonly treated areas.

As we reach adulthood, the number of fat cells in our bodies stabilizes. Weight changes occur primarily due to fluctuations in the size of these fat cells rather than changes in their quantity. Traditional weight loss methods, such as exercise and dieting, focus on consuming fewer calories than the body expends. When we lose weight, our bodies use stored energy from fat cells, causing them to shrink, but the cells remain present. This is why regaining weight is common; the fat cells can easily expand again.

For adults at a normal weight, the body typically has about 250-300 billion fat cells, located in subcutaneous and visceral tissues. After puberty, this number is fixed, meaning fat cells do not increase or decrease in number; they only swell or shrink. Obesity occurs either due to an excess of fat cells or the expansion of existing ones.

Cryolipolysis offers a different approach by targeting specific areas of the body for fat reduction. Instead of general weight loss, this method focuses on "freezing" fat cells in localized regions, effectively causing them to be reduced where treatment is applied. While the treatment may only decrease fat in the targeted area by about 25%, the real advantage of cryolipolysis lies in its ability to sculpt and shape the body.

A typical cryolipolysis treatment involves several key steps: skin cleansing before treatment, application of a cryotherapy mask, the treatment itself, and a post-treatment skin cleansing.

Cryolipolysis is particularly effective for individuals struggling with localized obesity. Ideal candidates are not those with generalized obesity but rather those looking to target concentrated areas of fat, such as the abdomen, flanks, waist, arms, and buttocks. Depending on the thickness of the fat and the desired outcome, patients typically require 1 to 3 treatment sessions, with a minimum waiting period of 30 days between sessions. Each course of cryolipolysis can eliminate approximately 35-45% of fat in the targeted area.

Initial Assessment: The process begins with a physical examination. A trained therapist will evaluate your condition in detail to identify areas of concentrated fat.

Marking the Treatment Area: Once the areas to be treated are determined, they are clearly marked for precision during the procedure.

Application of Cryotherapy Mask: To protect your skin from potential frostbite during treatment, a specialized cryotherapy mask is applied to the targeted area.

Beginning the Treatment: The treatment head is positioned over the marked area, where it will create a gentle suction to draw the fat into the device. This initiates the cryotherapy process.

Initial Sensation: During the first few minutes, you may experience a tingling sensation as the cooling begins. However, any discomfort typically subsides quickly, and most patients find the overall experience to be quite comfortable.

Treatment Duration: The cryotherapy session usually lasts around 35 minutes.

Post-Treatment Massage: After the treatment, a relaxing massage is performed on the treated area for about 3-5 minutes. This massage helps to break down the treated fat cells and enhance the fat reduction effects.

A single cryolipolysis treatment can eliminate 20-30% of fat cells in the targeted area. Over time, the body naturally metabolizes and excretes the apoptotic fat cells, leading to a healthier, more contoured body shape.

Patients typically require 1-3 sessions, with at least 30 days between each treatment. Depending on the area being treated, each session can last anywhere from 45 minutes to several hours.

In the initial ten minutes, you may feel a pulling sensation as the treatment probe attaches to your body. This includes a slight suction and cold sensation in the treated area. Although some discomfort may be felt initially, it usually diminishes as the procedure continues, and most patients report no pain once the area is cooled. After treatment, the targeted area may feel temporarily numb for about a week. The post-treatment massage further helps to break down the fat cells and maximize results.

Fat freezing, or cryolipolysis (CoolSculpting), is generally considered a safe and effective non-invasive fat reduction treatment. However, like any medical procedure, it can have side effects. Here are the common side effects associated with fat freezing:

• Bruising: The suction and cold temperatures can cause bruising in the treated area, which typically resolves within a few weeks.
• Swelling and Redness: The treated area may be swollen and red immediately after the procedure, lasting a few days to a few weeks.
• Pain and Stinging: Some patients report pain, stinging, or aching in the treated area during and after the procedure. This discomfort usually subsides within a few days.
• Skin Sensitivity: Treated areas may feel sensitive to touch or develop temporary numbness or tingling. This can last for a few weeks.
• Firmness: The treated area may feel firm or stiff due to the freezing process, which generally resolves over time.
• Itching: As the body eliminates the frozen fat cells, some patients may experience itching in the treated area.

Remember the following:

1. After the treatment, drink plenty of water to help your body get rid of the dead fat cells.
2. Eating healthily and exercising regularly is important to stop new fat cells from forming and maintain the results.

Commercial Fat Freezing Machines

1. CoolSculpting by Allergan:

• Cost: Approximately $75,000 to $150,000
• Details: CoolSculpting is one of the most well-known and widely used fat-freezing machines. The higher cost is associated with the brand reputation, efficacy, and comprehensive support from the manufacturer.

2. CoolShaping 2:

• Cost: Around $60,000
• Details: Another popular option, CoolShaping, offers capabilities similar to CoolSculpting but at a slightly lower price point.

Other Professional Fat Freezing Machines

1. Clatuu Alpha:

• Cost: Approximately $60,000 to $80,000
• Details: This machine offers dual applicators and is known for its efficiency and reliability.

2. Zeltiq CoolAdvantage:

• Cost: Around $70,000
• Details: Part of the CoolSculpting family, this machine offers faster treatment times and improved comfort.

Portable and Home Use Devices

• Cost: Approximately $500 to $1,500
• Details: These devices are significantly cheaper and less effective than professional machines. They are not FDA-approved and are generally not recommended due to safety and efficacy concerns.

Additional Costs

• Applicators: Professional machines often require the purchase of additional applicators, which can cost between $1,000 to $5,000 each, depending on the size and type.
• Maintenance and Training: There may be additional costs for machine maintenance, technician training, and software updates.