What is High Frequency?
The machine generates a mild high frequency current through the neon or argon gas-filled glass electrode with an infrared ray light and ultraviolet ray light.
High frequency electrotherapy instrument consists of high frequency oscillation circuit and capacitance-resistance and semiconductor devices, fitted with an insertable electrode insulated handle and glass electrodes.
There is a transformer inside the handle and an electric wire at the side of the handle to output the microcurrent.
When turning on the machine, high frequency oscillation circuit produces high frequency current, makes glass electrode discharge, and produces infrared ray or ultraviolet ray light.
When skin touches high frequency current, the vascular will alternating contraction and expansion.
Spark electrolysis oxygen from the air and generates ozone, which paly the role of bactericidal anti-inflammatory and improves blood circulation.
High frequency electrotherapy instrument effects reflected as follows: disinfection, treatment of acne, acne cure, reducing and regulating sebum secretion and metabolism, promote lymph and blood circulation, improving cell regeneration capacity. The heat and vibration effects on the skin a soothing massage.
High frequency can:
1. Sterilize skin with special ultraviolet infrared ray
2. Point or large area treatment can be selectable by using different electrode
3. Heal acne
4. Improve hair growth by using glass hair comp of high frequency machine
5. Electrode glass tube can be selectable
WARNINGS
1. For sensitive skin, place a piece of voile fabric to avoid
excess stimulation.
2. Do not hold on to one part of the skin for over 10 seconds.
3. Pregnant women and people with pacemakers are unļ¬t
to use this product
4. Make sure that the probe is inserted fully into the device
before turning it ON. Turn the intensity down to the low-
est setting when you are ļ¬nished using the device, then
turn the device OFF
5. Individuals with freckles might not receive maximum
results using this device.
IMPORTANT SAFETY NOTICE
1. Donāt disassemble the device by yourself. All the repair-
ing should be performed by trained staļ¬.
2. Please donāt assemble or operate this device while your
hands are wet or when you are near water.
3. If any of the conditions below occur, unplug the device
immediately:
ā¢The device touches the liquid
ā¢The device has an abnormal smell, is smoking, or
producing
ā¢loud and strong noises.
ā¢The cable is damaged
ā¢The device has physical damage
4. Keep the cable out of the way of others so no one trips
on it.
5. Please pull out the power cable after using it for your own
safety
6. Donāt insert anything into the deviceās jack, this is a
hazard that can potentially cause a ļ¬re. If anything gets
into the device, contact the manufacturer. Donāt try to get
it out yourself.
7. Please donāt place the device on anything that canāt
stand steadily.
8. Our company reserves the right to modify the information
in this introduction without notiļ¬cation!
Two Electrodes Features
Notice: Approximate diameter of metal head: =11.55 mm(attention: if intending to use this high-frequency electrode with other high-frequency equipment, carefully review the diameter measurements)
Provided above prior to purchase to ensure proper compatibility and fit.


