Can I skip weekly maintenance if I only use one handpiece?

Even unused handpieces should be inspected weekly. Dust accumulates and connections oxidize even when not in use.

How do I clean LED panels safely?

Dry microfiber cloth only. Never spray liquid – electronics inside. If LED has makeup or product on it, slightly damp cloth, then dry immediately.

P6-MaintenanceMaintenance

Placeholder SKU B: Weekly Maintenance

Name: Placeholder SKU B: Weekly Maintenance
Uploaded: 2026-06-03T15:30:16
Duration: 4 min
Description: A 4-minute weekly maintenance walkthrough for the Placeholder SKU B - each handpiece, the main unit, accessories.

Multiple handpieces means multiple maintenance routines. The complete weekly checklist for your Placeholder SKU B.

beginner25 min8 min read

Machines:Placeholder SKU B

Updated 06/03/2026v1.0

A 4-minute weekly maintenance walkthrough for the Placeholder SKU B - each handpiece, the main unit, accessories.

What you will master

How to deep-clean each handpiece of your Placeholder SKU B
Different cleaning methods for different handpiece types
How to inspect cables and connectors for wear
How to maintain the main unit and storage system
When to replace consumable parts

A multi-function system like the Placeholder SKU B has 5 different handpieces, each with its own cleaning needs. A 25-minute weekly routine keeps everything performing at peak for years.

Tip

Make it a routine

Schedule the weekly maintenance same day same time – Sunday morning works well. Becomes automatic.

Different surfaces, different methods

Handpieces with metal transducers (RF, cavitation): water + soap only. Handpieces with electrodes (microcurrent): alcohol acceptable. LED panels: dry wipe only.

Equipment

Required device

Multi-function system

Placeholder SKU B

View product

Your instructor

Dr. Sarah Mendez

Senior Esthetician and Trainer

Sarah has 12 years of experience in body sculpting and has trained over 800 estheticians worldwide on safe protocols.

Credentials: Licensed CIDESCO, IPL Certified, 12+ years experience

Pillar 6

Maintenance

Daily

+
Wipe each handpiece used today with appropriate cleaner
+
Store each handpiece in its foam slot
+
Wipe main unit display and buttons

Weekly

+Deep clean RF handpiece (transducer with mild soap, body with alcohol)
+Deep clean cavitation handpiece (water + soap on transducer only)
+Wipe microcurrent electrodes with alcohol pad
+Dry wipe LED panel (no liquids)
+Clean ultrasonic handpiece tip thoroughly
+Inspect all cables for kinks, fraying, or damage
+Wipe main unit body, vents, and connector ports
+Verify all handpieces still connect properly
+Restock consumables (gel, alcohol pads)

Monthly

+Replace any consumable accessory pads or filters
+Inspect all foam storage inserts for wear
+Run a full function test on each handpiece
+Check warranty registration is still active
+Review your usage log for any recurring issues

Required supplies

Handpiece bodies, microcurrent electrodes

Cavitation and RF transducer faces only

All wiping needs

Cleaning small crevices and connector ports

Handpiece care

RF handpiece: Body with alcohol, active face with soap+water only.

Cavitation handpiece: Body with alcohol, transducer face with soap+water only. NEVER use alcohol on the transducer face.

Microcurrent handpiece: Electrodes can be wiped with alcohol pad – they need to stay conductive.

LED panel: Dry wipe only. Never any liquid. Use compressed air for dust in vents.

Ultrasonic handpiece: Tip with soap+water, body with alcohol.

Frequently asked

Common questions answered

20-25 minutes if done as a focused routine. First time will take 35-40 min as you learn each handpiece.

Keep your investment lasting for years

Now that maintenance is sorted, master all modes of your Placeholder SKU B.

See All Modes Explained Initial Setup

Placeholder SKU B: Weekly Maintenance