Same machine
Loading...
Loading...
A complete walkthrough of every control, every mode, and when to use what. Become fluent with your Placeholder SKU A.
Every button on your Placeholder SKU A explained, every mode demonstrated, and clear guidance on which setting to use for which goal.
Your Placeholder SKU A has several modes designed for different goals. Once you understand which mode to use when, you will get significantly better results with less effort.
For your first 3-5 sessions, stick with Mode 1 (Standard) only. Master the basics before exploring advanced modes.
Mode 2 (Intensive) is only for users who have completed 6+ standard sessions and have established skin tolerance. Do not start here.
Your instructor
Senior Esthetician and Trainer
Sarah has 12 years of experience in body sculpting and has trained over 800 estheticians worldwide on safe cavitation protocols.
Credentials: Licensed CIDESCO, IPL Certified, 12+ years experience
Pillar 3
Protocol summary
Target area
Abdomen, thighs, or flanks
Per session
15 min
Sessions
10-12
Results after
Session 4-6
Localized stubborn fat
Areas that resist diet and exercise (love handles, lower belly).
Soft cellulite
Fat-based cellulite (not fibrous type).
Post-pregnancy contouring
Minimum 6 months postpartum, not breastfeeding.
| Parameter | Value | Range | Notes |
|---|---|---|---|
| Frequency | 20 kHz | 20-40 kHz | Start at 20 kHz for first 5 sessions |
| Intensity | Level 3 | Level 1-7 | Increase by 1 level per 2 sessions if comfortable |
| Duration per area | 15 min | 10-20 min | Maximum 25 min per session |
| Handpiece type | Large head | Large for body | Use medium head only for small areas |
Press Mode button until “Standard” appears on display.
Use + button to set to your established level. For session 1-3, use Level 3.
Technique
Never jump more than 1 level between sessions.
Apply generous gel layer. Move in circular motion across target area for 15 minutes.
Technique
Cover each spot 3-5 seconds, never stationary.
Device auto-stops at 15 min. Check skin response before proceeding.
Session 1-2
Familiarization. Slight warmth, no visible changes.
Session 3-4
You may notice softer texture in treated area.
Session 5-6
First visible contour change. 1-2 cm reduction possible.
Session 7-12
Continued improvement. Total 3-4 cm reduction typical.
Maintenance phase
After full course, 1 session per 2 weeks maintains results.
Mode 1 (Standard) for the first 4 weeks, then alternate between Mode 1 and Mode 2 (Intensive) on alternate sessions if your skin tolerates it well.
Build a sustainable schedule that fits your life.
Series
Part 4 of 6